Wired Controller XE70-33/H
43
Introduction to Functions:
Sleep: this function can make the IDU enters into sleep mode, the IDU will
operate according to the preset sleeping temperature curve to create a comfortable
sleeping environment and improve sleeping quality. The sleep function can only be
activated under Cool, Dry, Heat, 3D Heat or Space mode.
Lock: under lock status, any button operation are invalid, user should operate
according to the prompt to unlock the function.
Light: this function can set the ON and OFF of light in light plate of IDU.
Rapid: it is used to fast increase or decrease temperature to the set value when
starting the unit. The fast function can only be activated under Cool or Heat mode.
Absence: this function is used for maintaining the indoor ambient temperature
and ensuring fast heating after starting the unit. The Absence function can only be
activated under Heat mode.
X-fan: it is used for removing the water in the evaporator of IDU after turning off
the unit to prevent mildew. The dry function can only be activated under Cool or Dry
mode.
Health*: it can turn on or turn off health function to control the air purification
module which can purify air. This function cannot be used under Floor mode.
12-Drying: this function can only be activated under Dry mode, after it is
activated, the set temperature of Dry mode becomes 12
℃
.
E-heater*: under Dry mode, in order to prevent the air-out temperature is too low,
