Installation Manual
41
7.3 Install Indoor Unit
1.Mounting plate should be installed horizontally. As the water tray's oulet for the indoor unit is two-way type, during
installation, the indoor unit should slightly slant to water tray's outlet for smooth drainage of condensate.
2.Fix the m ounting plate on the wall with s crews .
3.Be sure that the mounting plate has been fixed firmly enough to withstand about 60 kg. Meanwhile, the weight should
be evenly shared by each screw.
7.3.1 Installing of Mounting Plate
7.3.2 Boring Piping Hole
1.Slant the piping hole ( 55) on the wall slightly downward to the outdoor side.
1.
Connect the drain hose to the outlet pipe of the indoor unit.Bind the joint
with rubber belt.
2 .Insert t he p iping-hole s leeve into the hole to prevent t he connection piping and wirin g
from being damaged when passing through t he hole .
7.3.3 Installing of Drain Hose
7.3.4 Connecting Indoor and Outdoor Electric Wire s
1 .Open the front panel .
2.Remove the wiring cover, c onnect and fix power connection
cord to the terminal board shown in Fig 2.
3.Make the power connection cord pass through the hole at the
back of indoor unit.
4.Reinstall t he cord anchorage and wiring cover.
5.Reinstall the front panel .
55
Indoor
Outdoor
W all pipe
Seal pad
Unit
：
mm
Above 150 from
the celling
Above 150 from
the wall
Above 150 from
the wall
Ф
Ф
Above 150 from
the celling
Above 150 from
the wall
Above 150 from
the wall
2.Put the drain hose into insulating tube .
3.Wrap the insulating tube with wide rubber belt to prevent the shift of insulating
tube. Slant the drain
hose
downward slightly for smooth drainage of
condensate.
Note: The insulating tube shoud be connected reliably with the sleeve outside
the outlet pipe. The drain hose should be slanted downward slightly,without d-
istortion, bulge or fluctuation. Do not put the outlet in the water .
bulge
distortio n
outlet pipe of
indoor unit
insulating tube
connecte d
insulating tube
drain hos e
outlet pipe of
indoor uni t
drain hos e
outlet pipe of
indoor uni t
outlet pipe of
indoor unit
rubber belt
rubber bel t
rubber belt
Flooded
Fig. 2
Wr ing Cove r
yellow -
green
brow n
Outdoor unit connection
N(1 )
2
3
45
Φ55
Φ55
Φ55
Φ55
