25
Technical Information
Service Manual
Press " WiFi " button to turn on or turn off WiFi function. When WiFi function is turned
on, the " WiFi " icon will be displayed on remote controller; Under status of unit off,
on, the " WiFi " icon will be displayed
simultaneously for 1s, WiFi module will restore to
press "MODE" and " WiFi " buttons
factory default setting.
● This function is only available for some models.
12.WiFi button
13.
Press this button to achieve the on and off of healthy and scavenging functions in
LCD displays " ". Press the button for the second time to start healthy and
scavenging functions simultaneously; LCD displays " " and " ". Press this
scavenging functions simultaneo
button for the third time to quit healthy and
usly.
Press the button for the fourth t ime to start healthy function; LCD display " ".
Press this button again to repeat the operation above.
This function is applicable to partial of models
●
button
Press this button to set clock time. " " icon on remote controller will blink. Press
▲
"▲" or " " button within 5s to set clock
time. Each pressing of "▲" or " " button,
▲
clock time will increase or decrease 1 minute. If hold "▲" or " " button, 2s later
▲
time will change quickly. Release this button when reaching your required time.
Note:
Clock time adopts 24-hour mode
●
● The interval between two operation can’t exceeds 5s. Otherwise, remote contro- ller will quit setting status. Operation for
T-ON/T-OFF is the same.
10.CLOCK button
11.SLEEP button
Under COOL, or HEAT mode, press this button to start up sleep function.
" " icon is displayed on remote controller. Press this button again to cancel sleep
.After powered on, Sleep Off is defaulted. After
function and " " icon will disappear.
the unit is turned off, the Sleep function is canceled.
In this mode, the time of time can be adjusted. Under Fan DRY and Auto modes, this function is not available.
14.LIGHT button
Press this button to turn off display light on indoor unit. " " icon on remote
to turn on display light. " " icon is
controller disappears. Press this button again
displayed.
15.TEMP button
By pressing this button, you can see indoor set temperature, indoor ambient temp-
on indoor unit’s display. The setting on
erature or outdoor ambient temperature
remote controlleris selected circularly as below:
no display
● When selecting " " or no display with remote controll r, temperature indicator on indoor unit displays set temperature.
● When selecting " " with remote controll r, temperature indicator on indoor unit displays indoor ambient temperature.
● When selecting " " with remote controll r, temperature indicator on indoor unit displays outdoor ambient temperature.
Note:
● Outdoor temperature display is not available for some models. At that time, indoor
displays indoor set temperature.
unit receives " " signal, while it
● I ’s defaulted to display set temperature when turning on the unit.There is nodisplay in the remote controller.
● Only for the models whose indoor unit has dual-8 disply.
● When selecting displaying of indoor or outdoor ambient temperature, indoor
temperature and automatically turn
temperature indicator displays corresponding
Energy-saving function
Under cooling mode, press "TEMP" and " CLOCK" buttons simultaneously to
When energy-saving function is started
start up or turn off energy-saving function.
up, "SE" will be shown on remote controller, and air conditioner will adjust the set
Function introduction for combination buttons
