23
Technical Information
Service Manual
● When selecting auto mode, air conditioner will operate automatically accordin
temperature can’t be adjusted and will not be
to the sensed temperature. Set
/ " "
displayed as well. Press "FAN" button can adjust fan speed. Press " "
button can adjust fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool mode. Cool indicator " " on indoor unit is ON.
▲
"▲" or " " button to adjust set temperature.
Press "FAN" button to adjust fan speed. Press " " / " " button to adjust fan blowing angle.
● When selecting dry mode, the air conditioner operates at low speed under
Under dry mode, fan speed can’t be adjusted.
mode. Dry indicator " " on indoor unit is ON.
Press " " / " " button to adjust fan blowing angle.
● When selecting fan mode, the air conditioner will only blow fan, no cooling an
indicator is ON. Press "FAN" button
no heating. All indicators are OFF,Operation
to adjust fan speed. Press" " / " " button to adjust fan blowing angle.
● When selecting heating mode, the air conditioner operates under heat mode
Press "▲" or " " button to adjust set temperature.
Heat indicator " " on indoor unit is ON.
▲
Press "FAN" button to adjust fan speed. Press " " / " " button to adjust fan blowing angle.
(Cooling only unit won’t receive heating mode signal. If
remote controller, press ON/OFF button can’t start up the
setting heat mode with remote controller,setting heat mode with
unit).
2.MODE button
2
Press this button to select your required operation mode.
AUTO COOL DRY
FAN
HEAT
3
3.FAN button
Pressing this button can set fan speed circularly as: auto (AUTO), low( ), medium ( ), high( ).
Auto
Note:
● For preventing cold a r, after starting up heating mode, indoor unit will delay 1~5
depend on indoor ambient temperature).
minutes to blow air (actual delay time is
● Set temperature range from remote controller: 16~3
ć
(61-86°F);
Fan speed: auto, low speed, low-medium speed,medium speed, medium-high
speed,high speed.
● It’s Low fan speed under Dry mode
● Unde AUTO speed, air conditioner will select proper fan speed automatically according to ex-factory setting.
Note:
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is stopped to avoid mould.
Having set X-FAN function on: After turning off the unit by pressing ON/OFF
few minutes. at low speed. In this
button indoor fan will continue running for a
period, Hold fan speed button for 2s to stop indoor fan directly.
Having set X-FAN function off: After turning off the unit by pressing ON/OFF
button, the complete unit will be off directly.
X-FAN function: Hold fan speed button for 2s in COOL or DRY mode, the icon “ ” is
continue operation for a few minutes in order to dry
displayed and the indoor fan will
energization, X-FAN
the indoor unit even though you have turned off the unit. After
OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
●
●
●
auto mode)
● When settin T-ON, T-OFF or CLOCK, press "▲" or " ▲
▲
(Refer to CLOCK, T-ON, T-OFF buttons) When setting T-ON,
press "▲" or " " button to adjust time. (Refer to CLOCK,T-ON, T-OFF buttons)
4
4.TURBO button
Under COOL or HEAT mode, press this button to turn to quick COOL or quick
remote controller. Press this button again
HEAT mode. " " icon is displayed on
to exit turbo function and " " icon will disappear.
If start this function, the unit will run at super-high fan speed to cool or heat quickly
preset temp. as soon as possible.
so that the ambient temp. approachs the
▲
5.▲/ button
● Press "▲" or
" button once increase or decrease set temperature 1
ć
(°F).
Holding "▲" or " " button, 2s later, set temperature on remote controller will
change quickly. On releasing button after
setting is finished, temperature indica- tor on indoor unit will change accordingly. (Temperature can’t be adjusted under
▲
▲
6
Press this button can select left & right swing angle. Fan blow angle can be selected circularly as below:
button
6.
Press
(This indicator is not available for some models.)
(This indicator is not available for some models.)
(This indicator is not available for some models.)
