Gree GWC24ACE-K6DNA1A, Оригинальное руководство пользователя

Страница: 14 / 210

Ɣ
For preventing cold air, after starting up heating mode, indoor unit will delay 1~5
Ɣ
Ɣ
Under auto mode, temperature can be displayed;Under auto mode,
,
Low-Medium speed
Medium-High speed
Medium speed
High speed
Ɣ
Ɣ
10
Introduction for buttons on remote controller
Note:
set temperature can be adjusted.
to
Auto
Low speed
Note:
Ɣ
It’s Low fan speed under Dry mode
X-FAN function Hold fan speed button for 2s in COOL or DRY mode, the icon “ ” is
displayed and the indoor fan will continue operation for a few minutes in order to dry
the indoor unit even though you have turned off the unit. After energization, X-FAN
OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
4
TURBO button
Under COOL or HEAT mode, press this button to turn to quick COOL or quick
HEAT mode. " " icon is displayed on remote controller. Press this button again
to exit turbo function and " " icon will disappear.
3
FAN button
This button is used for setting Fan Speed in the sequence that goes from AUTO,
, ,
, then back to Auto.
Having set X-FAN function on: After turning off the unit by pressing ON/OFF
button indoor fan will continue running for a few minutes. at low speed. In this
period, Hold fan speed button for 2s to stop indoor fan directly.
Having set X-FAN function off: After turning off the unit by pressing ON/OFF
button, the complete unit will be off directly.
This function indicates that moisture on evaporator of indoor unit will be blowed
after the unit is stopped to avoid mould.
Ɣ
minutes to blow air (actual delay time is d epend on indoor ambient temperature).
Set temperature range from remote controller: 16~30
ć
(61-86°F);
Fan speed: auto, low speed, low-medium speed,medium speed, medium-high
speed,high speed.
to adjust fan speed. Press" " / " " button to adjust fan blowing angle.
Ɣ
When selecting heating mode, the air conditioner operates under heat mode.
Heat indicator " " on indoor unit is ON (This indicator is not available for some
PRGHOV3UHVVŸRUEXWWRQWRDGMXVWVHWWHPSHUDWXUH3UHVV)$1EXWWRQ
to adjust fan speed. Press " " / " " button to djust fan blowing angle. (Cooling
only unit won’t receive heating mode signal. If setting heat mode with remote
controller, press ON/OFF button can’t start up the unit).
Ÿ