1. Remove front panel for cleaning.
Using the fi gure at right as a guide, lift panel up and pull
out.
2. Wash the panel.
Wash with water, soft cloth or soft brush. Use only very
mild cleaners. Then dry completely.
NOTE:
Take down the display panel before cleaning.
Never use water above 113°F (45°C) because it may
cause discoloration or damage to surface.
3. Replace front panel.
Fit the sides of the panel into slots as shown and push
panel into place.
CAUTION
• Turn off power and disconnect unit from power source before cleaning. Failure to do so could cause electric shock.
• Never spray water on either indoor or outdoor unit. This could cause damage or unit failure.
• Never use abrasive cleaners on indoor or outdoor unit. Use only slightly damp clean, soft cloth or very mild cleansers.
CLEANING AND CARING FOR YOUR UNIT
Cleaning the Front Panel
Cleaning the Air Filter
CLEANING IS RECOMMENDED EVERY THREE
MONTHS.
NOTE:
If the indoor unit is exposed to excessive dust,
cleaning may be necessary more often. Use caution
when removing the fi lter to avoid sharp metal extensions.
1. Remove air fi lter by tilting up the unit cover and pulling
fi lter free.
2. Clean air fi lter using a vacuum or warm water and mild
cleaner below 113°F (45°C). Water above 113°F (45°C)
can cause discoloration or damage. Air dry fi lter in the
shade. Never use fi re to clean stains or debris on fi lter.
3. Reinsert the fi lter. See fi gure below. Align fi lter along
arrows. Then close unit.
11
