AUTO
COOL
DRY
FAN
(Only for cooling and heating unit.)
HEAT
ON/OFF button
Press once to turn on unit. Press again to turn off
unit. Using the ON/OFF function will cancel TIMER
and SLEEP functions, but preset times will not be
affected.
MODE button
Set AUTO, COOL, DRY, FAN, or HEAT sequentially.
In Auto Mode, room temperature is not displayed.
NOTE:
On power up, unit will default to AUTO
Mode. Initial room setting is 77°F (25°C), except in
HEAT Mode the initial setting is 82°F (28°C).
SLEEP button
Press this button to select SLEEP ON or SLEEP OFF.
This function must be set after the unit is powered on.
It will not function under AUTO or FAN modes.
FAN button
Select Low, Medium or High in Auto mode for default
fan speed. In DRY mode, only low fan speed can be
selected.
CLOCK button
Press the button, and clock icon will fl ash. Within
5 seconds, set the time by pr or – buttons to
set hours and minutes. Press button again to save
time setting. Note that this is the current time, not the
timer setting.
LIGHT button
Press the LIGHT button and the indoor unit display
turns ON. Press again, the indoor unit display turns
OFF.
TURBO button
In COOL or HEAT mode, use this button to turn
TURBO function on or off. The TURBO icon will
appear in the display when the function is on. When
changing modes or fan speeds, the function will be
canceled.
NOTE:
Be sure there are no obstructions between
remote control and the EVO Indoor unit ( receiver
sensor)
• Do not drop or throw the remote control.
• Do not submerge remote control in water.
• Do not leave in direct sunlight.
• Do not leave near heat source.
Medium fan
Low fan
High fan
AUTO
WIRELESS REMOTE CONTROL OPERATION
Names and Functions of Remote Control Buttons
Remote
Control
Signal Transmitter
MODE
FAN
LIGHT
7
