28
Installation in a sliding sash window(Optional)
3.
4. Install the window panel into the window frame.
Make sure that the exhaust cover is attached to the window panel.
Inner height of the window:20.5"(520mm)
Use the window panel.
1. Connect the rain guards to the insect guard net.
Insert all three projections on each rain guard into the holes in the insect guard net.
2. Attach the guard combined above to the window panel.
Push the insect guard net firmly to ensure that its four projections fit into the holes
Side “A” will now be at the top, as indicated in the diagram.
in the window panel.
Side “A” will now be at the top, as indicated in the diagram, when it is installed in
the window.
Cut the
sponge A
(adhesive type) to the proper length and attach it to the
window frame and to the side of sash.
Hole
Projection
Insect guard net
Rain guard
"A"
Projection
"A"
Window panel
sponge A
