11
Introduction for buttons on remote controller
TIMER button
10
●
At ON status, press this button once can set TIMER OFF. The character of HOUR
5 seconds
ON. After each pressing of "+" or "-" button, time will increase or decrease half an
TIMER
Note:
● Outdoor ambient temperature display may can’t be selected for some models.
When the unit receives " " signal, it displays indoo
r set temperature.
● Only for the model whose the unit h
as dual-8 displa
y
.
TEMP button
9
Press this button can see indoor set temperature, indoor ambient temperature or
outdoor ambient temperature on the un
it’
s displa
y
. T
emperature is set circularly
by remote controller as below:
no display
● When selecting " " by remote controller or no display
, temperature indicator on
the unit displays set temperature.
● When selecting " " by remote controller
, temperature indicator on the unit
displays indoor ambient temperature.
● When selecting " " by remote controller
, temperature indicator on the unit
displays outdoor ambient temperature.
SAVE function:
Under cool mode, press SAVE button and the unit will operate under SAVE mode.
Dual-8nixie tube on remote controller disp
lays "SE".
Air conditioner will operate at
auto speed. Set temperature can’t be adjusted. Press SA
VE button again to exit
SAVE mode. Air conditioner turn back to original set speed and set temperature.
●
This function is applicable to partial of models.
X-FAN button
8
After pressing this button under cooling or
dry mode, remote controller displays the
character of "X-FAN" and X-FAN function is started up. Press this button again to
cancel X-FAN function. The character of "X-FAN" will disappear.
Note:
●
After starting up X-FAN function, when turning off the unit, indoor fan will continue
to operate for a while at low speed to dry the residual wate
r inside the the unit.
● When the unit operates under X-FAN mode, press "X-FAN" button
can turn off
X-FAN function. Indoor fan stops operation immediately.
