12
Function introduction for combination buttons
Introduction for buttons on remote controller
TURBO button
11
When pressing this button under cooling or heating mode, air conditioner will enter
into quick cooling or quick heating mode. The character of "TURBO" is displayed
on remote controller. Press this button again to exit turbo function and the character
of "TURBO" will be disappeared on remote controller.
LIGHT button
13
Press this button can turn off the light for the unit’s display. " " icon on remote
controller will disappear. Press this button again to turn on the light for the unit’s
display. " " icon on remote controller will be displayed.
Child lock function
Switchover function for temperature display
Press "+" and "-" buttons simultaneously can turn on or turn off child lock function.
When child lock function is started up, " " icon will be displayed on remote
After turning off the unit by remote controller, press "-" button and "MODE" button
simultaneously to switch between
℃
and °F .
Note:
●
Time setting range: 0.5-24 hours.
●
controller will exit the setting status automatically.
Cancel TIMER OFF: Press "TIMER" button again under TIMER OFF status.
●
At OFF status, press this button once can set TIMER ON. Please refer to TIMER
off for detailed operation.
Cancel TIMER ON: Press "TIMER" button again under TIMER ON status.
(Not applicable for this unit)
hour. When holding "+" or "-" button, for 2 seconds, the time will change quickly until to
Time interval between two operations can’t exceed 5 seconds. Otherwise, remote
12
SLEEP button
Press this button under cooling, heating mode can start up sleep function.
" " icon will be displayed on remote controller. Press this button again to cancel
sleep function. " "icon on remote controller will be disappeared.
controller will not send signal.
