Gree GMV-Y36WL/A-T, Руководство по обслуживанию

Страница: 85 / 147

GREE hotovoltaic Multi VRF for North America
83
7.1.6 Support and Protection of Pipeline
(1) Support should be made for hanging connection pipe. Distance between each support cannot be
over 1m(3-1/4feet).
(2) Protection against accidental damage should be made for outdoor pipeline. When pipeline exceeds
1m(3-1/4feet), a pinch board should be added for protection.
6.2 Disassembly of Compressor Feet
In order to prevent unit from damage during transportation, 2 metal pieces are fitted
to outdoor unit
’s compressor feet before unit leaves factory. See fig.22.
Fig. 22
When installing the unit, metal pieces for transportation must be removed. Then
fasten the binding nuts again and wrap back soundproofing cotton.If unit runs with metal
pieces fitting on, compressor will shake abnormally and un
it’s operating life will be
shortened.
6.3 Vacuum Pumping, Refrigerant Adding
Do not purge the air with refrigerants but use a vacuum pump to vacuum the installation! There is no extra
refrigerant in the outdoor unit for air purging!
6.3.1 Vacuum Pumping
(1) Outdoor unit has been charged with refrigerant before delivery. Field-installed
connection pipe needs to be charged with additional refrigerant.
(2) Confirm whether outdoor liquid and gas valves are closed.
(3) Use vacuum pump to withdraw the air inside indoor unit and connection pipe from the
outdoor valve, as shown below.