Gree GMV-ND07TD/A-T, Руководство пользователя

Страница: 7 / 25

Multi Variable Air Conditioners One-way Cassette Type Indoor Unit
3
No. Name Appearance Q'ty Usage
2
Paper pattern for
installation
1 Locate the drill hole on ceiling
3
Tapping screw with
washer
4 Fix paper pattern
4 Washer fixing plate 4
Prevent the washer from
falling off
5 Drain Hose Assembly 1
To connect with the hard PVC
drain pipe
6 Special Nut 2
To be used for connecting the
refrigerant pipe
7 M10 Washer 10
To be used together with the
hanger bolt for installing the
unit.
8 Self-tapping screw 10 For mounting panels
9 Insulation 1 To insulate the gas pipe
10 Insulation 1 To insulate the liquid pipe
11 Sponge 1 To insulate the drain pipe
12 Fastener 4 To fasten the sponge
13
Remote controller
holder
1
Used for holding the remote
controller
14 Tapping screw 2
Used for fixing the remote
controller holder
3.2 Installation Position Selection
(1) The appliance shall not be installed in the laundry.
(2) The location should be able to withstand the weight of unit.
(3) The water can be drained conveniently from drainage pipe.
(4) There should be no obstruction near air inlet and air outlet.
(5) Follow the installation distance required in the Fig.3.2.1 below to ensure sufficient space
for maintenance.
(6) The installation location should be far from heat sources, flammable or explosive gas, or
smog spread in the air.
(7) The indoor unit, outdoor unit, power cord and connection electricity wire should be at
least 1m from television and radio in order to prevent interference and noise (Even
though 1m distance is ensure, there may be noise if the electric wave is too strong.).
(8) This indoor unit may be installed on ceilings up to 2.5m(98-3/8inch) to avoid accidental
touching.