Gree GMV MTAC VRF Series, Руководство по обслуживанию

Страница: 19 / 117

Gree GMV MTAC VRF for North America
15
(5) Tidy up the lines in slot on the back of the panel, and then bundle the front panel of wired
controller to its soleplate and the installation is completed.
NOTICE! If the wire size of the selected communication line is too large, you can peel some
sheath layer of communication wire to satisfy installation requirements.
If caliber of the communication cord is too large, which causes difficulty in leading or sticking the cord according to
above point 2 and point 5, strip some of the sheath of the communication cable to meet the installation requirement.
2.2.3 Removal Method
1 2 3 4
2.2.4 Connection of Communication Cord
There are 4 ways to connect wired controller with indoor units’ network:
One wired controller control one indoor unit Two wired controllers controls one indoor unit