Gree GMV MTAC VRF Series, Руководство по обслуживанию

Страница: 16 / 117

Gree GMV MTAC VRF for North America
12
NO. Symbols Instructions
2 Left and right swing function
3
It's valid under Save mode and displays during setting process
Temperature lower limit for Cooling: Limit the minimum temperature value under
Cooling or Dry mode
Temperature upper limit for Heating: Limit the maximum
temperature value under Heating, Space Heating or 3D Heating mode
4
Auto mode (Under Auto mode, the indoor units will automatically select their
operating mode as per the temperature change so as to make the ambient
comfortable)
5
It shows the setting temperature value (In case the wired controller is controlling a
Fresh Air Indoor Unit, then the
temperature zone will display FAP)
6 Cooling mode
7 Dry mode
8 Fan mode
9 Heating mode
10 When inquiring or setting project number of indoor unit, it displays "NO." icon
11
Floor Heating mode (When Heating and Floor Heating
simultaneously shows up, it indicates 3D Heating is activated)
12 Display "SET" icon under parameter setting interface
13 Space Heating mode
14 Display "CHECK" icon under parameter view interface
15
Outdoor unit operates under Save mode/upper limit of system capacitor less
100%/remote Save status
16 Sleep status
17
Current set fan speed (including auto, low speed, medium-low speed, medium
speed, medium-high speed, high speed and turbo seven status)
18 Air status, Indoor unit optional function
19 Remind to clean the filter
20 Quiet status (including Quiet and Auto Quiet two status)
21
Allow auxiliary electric heating On icon
22 Light On/Off function
23 X-fan function