Gree GKH12K3BI, Руководство по обслуживанию

Страница: 77 / 209

74
U-MATCH Air
Conditioners
Service Manual
cover half of the front circle of tape (Figure 3-1-7).
‹ :UDSSHGSLSHPXVWEH¿[HGWRZDOOXVLQJSLSHFODPSV
Caution: After the pipes are wrapped by protective materials, never bend the pipes to form very small angle,
and otherwise the pipes may crack or break.
‹ 'RQRWZUDSWKHSURWHFWLYHWDSHWRRWLJKWRWKHUZLVHWKHHI¿FLHQF\RIWKHUPDOLQVXODWLRQPD\EHGHFUHDVHG
(QVXUHWKDWWKHFRQGHQVDWHGUDLQDJHÀH[LEOHWXEHLVVHSDUDWHIURPWKHEXQGOHGSLSHV
‹ After the protective work is completed and the pipes are wrapped, use seal material to block the hole in the
wall, so as to prevent rain and wind from entering the room.
3.2 Caution in Connecting Pipes
Arrangement of connecting pipes shall be performed according to sit conditions with reference to the
following principles.
‹ Try to shorten the length of connecting pipes, within 5m for the better.
‹ Try to reduce height difference between indoor unit and outdoor unit.
‹ Try to reduce number of joint bends of connecting pipes.
‹
,IWKHOHQJWKRIFRQQHFWLQJSLSHVLVPRUHWKDQPDGHTXDF\RIOXEULFDQWRIWKHV\VWHPPXVWEHFKHFNHG
and if necessary, add more lubricant properly.
‹
Filling amount of refrigerant in the system is matched to a 7m connecting pipe. If the connecting pipe is
needed to lengthen, appropriate amount of refrigerant should be added. How much refrigerant should be
DGGHGIRUHYHU\PHWHUH[WHQVLRQUHIHUVWRWKHIROORZLQJWDEOH$OORZDEOHPD[LPXPSLSHOHQJWKLVP
‹ ,IKHLJKWGLIIHUHQFHEHWZHHQLQGRRUXQLWDQGRXWGRRUXQLWH[FHHGVPLQLQVWDOODWLRQRIDLUFRQGLWLRQHUDQ
oil return bend must be mounted at an interval of 6m.
‹ If heights of indoor unit and outdoor unit are different, pipes should be laid out with reference to Figure 3-2-
1.
Refrigerant pipe (thin)
- - - - - - Air pipe (large)
Outdoor unit
Air pipe
Oil loop of air pipe
Refrigerant pipes
Oil loop of air pipe
An oil loop is arranged
at an interval of 4-6m.
Indoor unit
Figure 3-2-1