Gree EJ51000061, Руководство по обслуживанию

Страница: 72 / 132

70
Rooftop Packaged
Service Manual
5. Fix the compressor
on to the base.
Nuts
Put the repaired or new compressor on base as
the direction during removing,and then screw down
fixing nut on compressor base with a wrench.
Note: Keep compressor level and vertically
on to the base. Never incline or invert it.
6. Connect compressor
with system pipes.
Discharge Pipe
Suction Pipe
Heat the connection pipes indicated by arrows
and then weld them with units pipes together.
Note: Pay attention to things around to avoid burning out.
7. Reconnect power
cord of compressor.
Reconnect the power cord into compressor according
to the procedure of disconnecting power cord. The line
connection must accord to the schematic diagram.
Note: the connection box of compressor must be
re-covered to resisting water. All cable can not
contact the pipe and moving parts such as fan.
8. Recharge refrigerant.
Nozzle
Connect refrigerant tank with nozzle of low pressure
(indicated by the maker) for recharging refrigerant.
Note: Check the leak after finishing the connectionpipes.
Charge amount should be consistent with nameplate.