27
Installation Manual
Indoor unit side
Note
The temperature of refrigerant circuit will be high, please keep the
interconnection cable away from the copper tube.
An all-pole disconnection device which has at least 3mm separation
distance in all pole and a residual current device(RCD)with the rating
of above 10mA shall be incorporated in the fixed wiring according to
the national rule.
*
*
Circuit Diagram
Control box cover
4-core rubber cable
(to outdoor unit)
Yellow/Green
Blue Black Brown
N(1)
2
3
Fig.12
Fig.13
Bolting the grille assembly to the body
Install the grille assembly to the body with the four bolts,spring washers,and washers.
Remove the control box cover and install the connection cord. (Fig. 12 and 13)
Washer
Spring washer
Bolt
No gap between ceiling and
grille around entire periphery.
Fig.14
Please see the graph on page 6
