78
Installation and Maintenance
Service Manual
Procedure
Step
Remove one screw on magnetic coil, and
then remove the magnetic coil.
Cutting the pipeline of welding the gas valve
and the liquid valve, Remove the screws
fixing the valves, remove the gas valve and
the liquid valve.
Note:
When cutting weld, wrap the valve with wet
cloth completely to avoid damaging the valve
due to high temperature.
Magnetic coil
10. Remove magnetic coil
11. Remove gas valve and liquid valve
Screw
Liquid valve
Gas valve
Screws
Screws
Capillary sub-assy
Capillary sub-assy
4-way valve assy
12. Remove 4-way valve assy and capillary sub-assy
Cut off the welded pipe of the 4-way valve
component to the condenser assy and
compressor, and then remove the 4-way
valve.
Note:
When cutting weld, wrap the 4-way valve
with wet cloth completely to avoid damaging
the valve due to high temperature.
Cut off the capillary welded tube to the
condenser and remove the capillary.
