GReddy e-01, Инструкция по эксплуатации, Страница: 26 / 55

B-5 PULSE INPUT
25
This feature is used to monitor the pulse input signal with the
optional External Input Signal Harness (sold separately).
1. NAME
Input name to label each input
signal channel. Input up to 8
letters.
2. UNIT
Select the unit for the input signal. Select a blank space if proper
unit is not one of the options.
SP - - - - - None
Hz - - - - - Pulse frequency
ms - - - Pulse signal high point
ms - - - Pulse signal Low point
% - - - - Pulse signal high point rate
% - - - - Pulse signal Low point rate
km/h - - - Vehicle speed
3. WARING
Input the warning point for the input signal.
4. LOCATED
- - - Warning feature will operate when the input signal exceeds the
warning setting.
- - - Warning feature will operate when the input signal drops below
the warning setting.
Select the Warning feature condition.
Character input screen
Move the cursor by turning
the SET knob and press to
select. Press the SHIFT
button to erase input, and
MENU button to cancel. Press
OK when input is complete.
PULSE SIGNAL
PULSE SIGNAL LO
PULSE SIGNAL HI
e-01英語版 03.3.19 20:29 ページ 26