GREAT PLANES SlowPoke, Инструкция по эксплуатации

Страница: 15 / 32

❏ ❏
16. Insert the front and middle auxiliary spars into the
tops of the ribs, aligning the outboard ends flush with the
outboard edge of T4. Install the aft auxiliary spar in its
notches in ribs T1, T2 and T3, aligning the outboard end
halfway between T3 and T4 (we will trim the excess later).
Glue the main spar and the auxiliary spars in place.
❏ ❏
17. From a 1/16" x 5/8" x 24" balsa stick, cut an
11-7/16" sub leading edge. Align the sub leading edge flush
with the outboard edge of T4 and glue in place. Note: Save
the leftover piece for the left outer panel.
❏ ❏
18. Sand the sub leading edge to the shape of the ribs
as you did with the center wing panel.
❏ ❏
19. Unpin the bottom TE sheet and lift the wing off
the plan.
❏ ❏
20. Trim and sand the LE sheeting flush with the front
of the sub leading edge.
❏ ❏
21. Position the top (die-cut) TE sheet, aligning it with
the edges of the bottom TE sheet. Glue it in place.
❏ ❏
22. From the leftover 1/16" x 3" balsa sheet, cut three
4-1/8" long sheets and edge glue them in position as you
did with the bottom sheeting. Hint: Remember to trim the
third piece along the center of the front auxiliary spar.
❏ ❏
23. From a 1/16" x 3" x 24" balsa sheet, cut an 11-7/16"
long LE sheet. Edge glue it in position as you did with the
bottom sheeting.
❏ ❏
24. From a 1/16" x ¼" x 24" balsa stick, cut and glue
cap strips in position on T1 and T2. Hint: Align the top cap
strip on T1 flush with the inboard edge of T1.
❏ ❏
25. Trim and sand the top LE sheeting flush with the
sub leading edge. Trim and sand the spars and sheeting
flush with T1 and T4. Note: Be careful not to change the
angle of T1.
❏ ❏
26. Position and glue the die-cut 1/8" balsa wing tip,
aligning it with the trailing edge and flat on the building surface.
Note: The wing tip will not come all the way to the front of
the sub leading edge.
❏ ❏
27. Position and glue the three die-cut 3/32" balsa tip
braces as shown on the plan.
Repeat steps 1-27 to build the left outer wing panel.
15