GREAT PLAINS YP-425, Руководство оператора

Страница: 47 / 134

YP-425, 625, 825, & 1025-A3P Table of Contents Index Operating Instructions 43
2018-07-23 Table of Contents Index 401-652M
Field Operation
Perform all steps in “ Pre-Start Checklist ” on page 23
and “ Field Set-Up Checklists ” on page 42.
Consult seed monitor for alarms during planting. Check
that reported rates are consistent with your plan.
When reloading seed, check consumption against
anticipated use to that point.
First Pass Operation Checklist Page
1.
Slide gates open. Shutters set. 39
2. Raise planter and line up at start of first
planting row.
23
3. Prime meters with seed.
Leave fan running.
39
4. Unfold marker on next-row side. 40
5. Pull forward, lower planter, and begin planting
for a short distance.
23
6. Stop. Assess:
•
planting depth
•
seed spacing
•
press wheel operation
-
7. Make necessary adjustments 45
8.
Resume planting. -
Sharp Field Turns
a
Checklist
a. Monitor manifold pressure during end-of-pass operations
and turns. Adjust operations as needed to maintain meter
pressurization.
Page
1.
Fold marker 40
2.
Raise planter when fold is complete 23
3.
Make turn
4.
Lower planter 23
5.
Unfold marker on next-row side. 40
6.
Resume planting.
Suspending Planting Checklist Page
1.
Stop tractor -
2. Fan hydraulic circuit to Float or Neutral 36
3.
Hydraulic drive circuit to Float or Neutral -
4. Fold Marker 40
5.
Raise planter 23
Ending Planting Checklist Page
1. Suspend operations as above, then
2.
Lights ON -
3. Transport 24