GREAT PLAINS YP-425, Руководство оператора

Страница: 35 / 134

YP-425, 625, 825, & 1025-A3P Table of Contents Index Operating Instructions 31
2018-07-23 Table of Contents Index 401-652M
Machine s/n:
YP425A3P s/n B1006M-
YP625A3P s/n B1008P-
YP825A3P s/n B1013R-
YP1025A3P n/a
Refer to Figure 22 and Figure 23
The capacity of this hopper is 1.2 bu.
Hopper lids have distinct ends:
•
the hinge end (with two lugs ) mates with the
front end of the hopper.
•
the latch end (with a single lug) mates with the rear
end of the hopper.
1. Pull the rear of the lid edge to the rear.
2. Swing the lid up at rear.
3. Disengage the lid at the front lugs.
4. Prepare the hopper for loading by storing the lid on
the front lip of the hopper, using the hook-plate
feature inside the lid.
Refer to Figure 24

The seed hoppers themselves are designed to be
removed, but are not removed for routine operations.
5. Install correct seed disks (page 64).
6. Close all seed inlet shutters (page 65).
7. Check that each hopper is correctly seated and
secured:
pivot hooks engage at front,
latch engaged at rear,
seed hose secured to
discharge weldment with
clamp.
8. The hopper slide gate may be left open (by pulling
back), and doing so slightly increases seed capacity.

If slide gate is open for seed loading, seed inlet
shutters must be closed unless the planter is already
at the field. Transporting with both gates and shutters
open can plug meters.
Figure 21
Hopper Lid Hinge Lugs
28131
3 3
2
1
1
2 3
Figure 22
Air-Pro
®
Row Hopper
(serial number B1013R-)
29975
1
2
6
4
3
5
U
D
F
B
L
R
1
2
3
4
5
6