GREAT PLAINS Yield-Pro PL5800, Руководство оператора

Страница: 20 / 111

Great Plains | 411-474M | 12/17/2019 12
PL5800 Planter Table of Contents Index Preparation and Setup
Hoses with a retracted cylinder symbol (2) feed
cylinder rod ends.
For hydraulic fan and drive motors, connect the
hoses with the retracted cylinder symbol to the
pressure side of the motor. All motor returns
combined in motor return hose.
The fan motor requires further hook up of a third line
which returns hydraulic fluid from the fan motor case.
Electrical Connections
The planter is equipped with two standard electrical
systems requiring separate connections. Optional
equipment may required additional connections.
Before making connections, make sure the tractor is
shut down with accessory power off.
The following connections can be made in any order,
but all connections must be made before moving the
planter.

Planter light cable (1) to the tractor,

console lead (2) to the console harness, and

any optional harnesses.
Hitching with 2-Point Hitch
Load Sway Hazard
Failure to adjust 3-point arms and sway
blocks can result in injury.
1. Adjust the tractor 3-point arms and sway blocks
to minimize side-to-side sway and assure proper
tracking in the field and when transporting. See
your tractor operator’s manual for information.
2. Connect the tractor to the planter 2-point hitch. if
using a quick hitch, be sure the planter locks into
the hitch securely.
3. Raise the hitch enough to take pressure off the
parking stands.
4. Remove each pin (1) and slide up the parking
stand.
5. Install the pins in the bottom hole (2) of the
parking stand.
6. Connect the hydraulic hoses to the tractor
remotes.
Hitching with Hydraulic Hitch (Option)
Do not use the hydraulic hitch with a tractor
equipped with a 3-point hitch.
1. Move the tractor close to the planter hitch.
2. Connect the hydraulic hoses for the tongue
circuit in order to raise and lower the tongue.
Allow slack for hitch movements.
3. Make the electrical connections for the planter
console circuit to control the planter hydraulic
systems.
2
1
31733
2
1
25236
25237
!
1
71113
2
2
!