GREAT PLAINS Yield-Pro 3PYPA, Руководство оператора

Страница: 18 / 196

Great Plains | 401-647M | 2019-06-11 Table of Contents Index 14
3PYPA Table of Contents Index Preparation and Setup
Preparation and Setup
This section helps you prepare your tractor and 3PYPA
Planter for use, and covers tasks that need to be done
seasonally, or when the tractor/planter configuration
changes.
Before using the planter in the field, you must hitch it to a
suitable tractor, inspect systems and level the planter.
Before using the planter for the first time, and periodically
thereafter, certain adjustments and calibrations are
required.
Initial Setup
See “ Appendix B - Initial and Option Setup ” on
page 163 for pre-delivery items (normally completed by
dealer), and first-time/infrequent setup tasks, including:
•
Install seed monitor console in tractor (page 163).
•
Set initial down-pressure (option, page 171).
•
Install Options not factory- or dealer-installed.
Post-Delivery/Seasonal Setup
On initial delivery, use with a new tractor, and seasonally,
check and as necessary, complete these items before
continuing to the routine setup items:
•
Install seed monitor console in tractor (page 163).
•
Bleed hydraulic system (page 115).
•
Check center section and wing level (page 168).
•
Radar calibration (page 167).
•
De-grease exposed cylinder rods if so protected at
last storage.
Pre-Planting Setup
Complete this checklist before routine setup:
 Read and understand “ Important Safety
Information ” on page 1.
 Check that all working parts are moving freely, bolts
are tight, and cotter pins are spread.
 Check that all zerks are in place and lubricated. See
“ Lubrication ” on page 126.
 Check that all safety decals and reflectors are
correctly located and legible. Replace if damaged.
See “ Safety Decals ” on page 5.

Inflate tires to pressure recommended and tighten
wheel bolts as specified. See “ Tire Inflation Chart ”
on page 142.