GREAT PLAINS SPARTAN II, Руководство оператора, Страница: 77 / 131

Great Plains | 166-486M | 2020/10/08 70
Spartan
II
607 Table of Contents Index Operation
A caster lock pin is located near each caster wheel
pivot point.
Trailer Loading
1. Line up the machine with the trailer.
2. Lift up the caster lock pin handle (1) and rotate
90°. Make sure the pin is aligned with the notch
(2) in the circular plate on the caster weldment.
Repeat for the other caster wheel.
Once the caster lock pins are engaged, the
casters will not rotate.
Serious Machine Damage Risk
Do not attempt to steer the machine
side-to-side with the caster lock pins
engaged. Serious damage could be done
to the machine.
3. Back the machine onto the trailer and secure for
transport.
Trailer Unloading
1. Before attempting to move the machine off the
trailer, check to make sure the caster lock pins
are fully engaged in the notches on the circular
plate.
2. Hook up the tractor to the machine and carefully
pull the machine off the trailer.
Once the machine is on the ground, disengage
the caster pivot lock pins before moving any
further.
Serious Machine Damage Risk
Do not attempt to move the machine any
further than just off the trailer with the
caster lock pins engaged. Serious damage
could be done to the machine.
3. To disengage the caster lock pins, lift up on the
handle (1). Rotate the handle 90°. Make sure the
caster lock pin is completely out of the notch (2)
on the circular plate.

Parking
Follow these steps when parking the drill for periods
of less than 36 hours. For longer periods, see
“
Storage ” on page 84.
1. Park the drill on a solid, level surface.
2. If the drill has air brakes:
a. Stop the tractor engine and apply the parking
brake.
b. Open the drain valve on the air reservoir and
drain any water. Close the drain valve.
c. Start the tractor engine.
3. To reduce tongue weight, raise, fold, and lock the
implement (page 31).
Static tongue weight of a loaded, lowered,
and unhitched drill can be as much as
1500 kg.
4. Put the tractor in park and apply the tractor
parking brake. Stop the engine and take the key
with you.
5. Apply the parking brake on the drill, if equipped.
6. Check that hopper lids are latched, and secure
the hopper lids with a security cable or padlock
and chain to prevent entry by children. See
“
Closing Hopper Lid
” on page 44.
68807
1
2
68808
!
!
1
2
68807
i