GREAT PLAINS SPARTAN II, Руководство оператора, Страница: 92 / 131

Spartan
II
607 Table of Contents Index Maintenance
Great Plains | 166-486M | 2020/10/08 85
opening the lid. It also prevents entry of pests,
debris, and precipitation.
5. Lubricate the drill at all points listed in
“ Maintenance ” on page 72.
6. Check all bolts, pins, fittings and hoses. Tighten,
repair or replace parts as needed.
7. Check all moving parts for wear or damage.
Make notes of any parts needing repair or
replacement before the next season.
8. Set meter doors to slightly open, but not wide
enough for animals to enter the meters. Wire
doors in place if needed. Do not store the drill
with seals compressed.
9. Raise and latch the ladders, to discourage
climbers.
10. Clean drill of mud, dirt, excess oil and grease.
11. Apply grease to exposed cylinder rods to prevent
rust.
12. Use touch-up paint to cover scratches, chips, and
worn areas to prevent rust.