GREAT PLAINS SPARTAN II Скачать руководство пользователя страница 55

Страница: 55 / 131

Great Plains | 166-486M | 2020/10/08

Spartan

607

Table of Contents

Index

Operation

4. Remove and save the final range gears (2) and

(3), and the hub assembly (5).

Temporarily leave the gear on the metering

shaft to make a handle to pull the metering

shaft out of the meter.

5. Carefully remove the metering shaft.
6. Store the metering shaft in the tool box.
7. Carefully insert the new metering shaft in the

meter box.

8. Install the hub assembly and secure with the

retainer clip. Turn the metering shaft a few times.

9. Mount the final range gears and install the lynch

pins.



Shoot Conversion for Dual-Hopper

Double-Shoot to Single-Shoot

1. Park the tractor and the drill on a solid level

surface.

2. Put the tractor in park and apply the tractor

parking brake.

3. Make sure the meters are turned off. Operate the

fan for 30 seconds to empty the primary seed
hoses.

4. Stop the tractor engine and take the key with you.
5. Chock the wheels on the cart.
6. Open the cap (1) of the Y-fitting (2) mounted on

the seed tube of the opener.

7. Disconnect the fertilizer hose (3) from the

fertilizer tube (4).

8. Install the fertilizer hose on the Y-fitting. Make

sure the hose clamp is seated and tight.

Single-Shoot to Double-Shoot

1. Park the tractor and the drill on a solid level

surface.

2. Put the tractor in park and apply the tractor

parking brake.

3. Make sure the meters are closed. Operate the

fan for 30 seconds to empty the primary seed
hoses.

4. Stop the tractor engine and take the key with you.
5. Chock the wheels on the cart.
6. Disconnect the fertilizer hose (1) from the

Y-fitting (2).

7. Install the fertilizer hose on the fertilizer tube (3).
8. Install the cap (4) on the Y-fitting.

68862

1 2

Содержание SPARTAN II




































































































































Результаты поиска

Содержание SPARTAN II

Отзывы:

GREAT PLAINS SPARTAN II, Руководство оператора, Страница: 55 / 131

Результаты поиска

Содержание SPARTAN II

Отзывы: