GREAT PLAINS SPARTAN II Скачать руководство пользователя страница 17

Страница: 17 / 131

Great Plains | 166-486M | 2020/10/08

Spartan

607

Table of Contents

Index

Safety Decals

Falling Hazard

848-511C

Do not ride or allow others to ride on moving machine
to avoid risk of falling off.

Two decals, one on right-hand side of cart frame, and
one on left-hand side at ladder.

Read Operator Manual

848-512C

Carefully read all instructions and understand their
meaning for the machine and any installed options.

One decal on left side of tongue near hitch.

Crushing Hazard (S/N C1009F-)

848-513C

Stay clear of moving parts to avoid injury. Do not
stand between hitches while tractor is moving.

Two decals, one on end of each wing.

Pinch Point Hazard

848-514C

Do not stand near wings or markers during folding
operation.

S/N C1009F-

Four decals, one on front of each wing

pivot link, and on each side of rear parallel arms.

68812A

848-512C

WARNING:

Cancer and Reproductive Harm - www.P65Warnings.ca.gov

68812D

38227

38645B

Содержание SPARTAN II




































































































































Результаты поиска

Содержание SPARTAN II

Отзывы:

GREAT PLAINS SPARTAN II, Руководство оператора, Страница: 17 / 131

Результаты поиска

Содержание SPARTAN II

Отзывы: