GREAT PLAINS NTA3010, Руководство по предпродажной подготовке

Страница: 22 / 47

2022 - 04 - 14 Table of Contents 160-220M
NTA3010, NTA3510 and ADC Table of Contents 20
Setup
Hitch Cart to Implement
Hitch link details are slightly different for ADC2350 and
ADC2220 carts.
Hitching ADC2350 Cart
Refer to Figure 17,
which, for clarity, depicts the air cart without the rear hopper
1. Use a line (not shown), from the cart tank hoops, to
tie the cart links up so that the ball swivels are
at about the same height as the lug holes .
2. Drive the roll pins out of the lug pins and
remove the lug pins.
3. Have a tractor slowly guide the cart backwards until
the link arm ball swivels are within two feet (60cm)
of the lug holes , and aligned with them side-to-
side.
4. Set the tractor parking brake. Remove the pins
restraining the telescoping arms . Do not remove
the stop bolts .
5. Re-insert the lug pins and secure with
roll pins .
6. Release the tractor brakes and back up the cart until
the telescoping arm pins can be inserted and
secured with cotter pins .
Hitching ADC2220 Cart
Refer to Figure 18
7. Use a line (not shown), from the cart walkboard, to
tie the cart links up so that the ball swivels are
at about the same height as the lug holes .
8. Drive the roll pins out of the lug pins and
remove the lug pins.
9. Slowly back cart toward center of implement. When
ball swivels are aligned with implement lugs ,
insert lug pins . Secure with roll pins .
You may be severely injured or killed by being crushed
between the tractor and cart or between the cart and
implement. Do not stand or place any part of your body
between the cart and implement while hooking up.
2
Figure 17
Hitching ADC2350 Cart to Drill
26448
1
93
85 92
86
17
53
3
85 1
2
53 17
1
2
92
86
3
17
53
92
93
2
Figure 18
Hitching ADC2220 Cart to Drill
16430
1
17
53
73
85 1
2
53 17
1 2
17 53