manualshive.com logo in svg

GREAT PLAINS NP2540, Руководство оператора, Страница: 52 / 196

Поделиться
Скачать
GREAT PLAINS NP2540 Скачать руководство пользователя страница 52

2019-04-12

Table of Contents

Index

417-459M

NP2540

Table of Contents

Index

Operating Instructions

48

Raising/Lowering Applicator

Operate the tractor hitch in “position” or “depth” control

mode, regardless of applicator hitch type.
The applicator may be raised and lowered while folded.

Raise For Transport (Folded)

These steps presume an applicator parked or stored

folded, already raised, but on lift-assist locks and parking

stands. No use of the applicator hydraulics is required.
1. Verify that lock channels are installed on the

lift-assist cylinders (page 47).

2. Verify that wing lock pins are installed on the folded

wings (page 47).

3. Raise the tractor 3-point hitch just enough to lift the

parking stand bases off the ground. Set the hitch

circuit to Neutral. Shut off the tractor.

4. Raise the parking stands (page 40).

The FOLD / FIELD switch may be in any position for

lift while folded.

Gradual Crushing Hazard:

Do not rely on hydraulic pressure alone to keep the applicator

raised. Use parking stands (page 40) and locks (page 47)
when working around a raised applicator. The tractor hitch

may settle.

Equipment Damage Risk:

Do not fully fold or fully unfold while lowered. Perform
complete fold and unfold only when fully raised. When

lowered, the wing coulters near the wing pivots may be

damaged by bending or ground dragging.

Содержание NP2540





































































































































































































Отзывы:

Нет отзывов