manualshive.com logo in svg

GREAT PLAINS NP2540, Руководство оператора, Страница: 10 / 196

Поделиться
Скачать
GREAT PLAINS NP2540 Скачать руководство пользователя страница 10

2019-04-12

Table of Contents

Index

417-459M

NP2540

Table of Contents

Index

Important Safety Information

6

Transport Machinery Safely

Maximum transport speed for applicator is 20 mph (32

kph), 13 mph (22 kph) in turns. Some rough terrains

require a slower speed. Sudden braking can cause a

towed load to swerve and upset. 

Do not transport an applicator that weighs over 20,000

pounds (9060 kg). Loading liquid fertilizer tanks or

transporting with a nurse tank hitch to the applicator can
easily exceed this limit.

Tow nurse tank separately. Do not tow a nurse tank in

train with the applicator on public roads.

Never park an anhydrous ammonia tank on public roads

or anywhere near sites with high occupancy or high-risk
populations, such as shopping areas, events, schools,

hospitals, retirement communities, etc.

Avoid transporting an anhydrous ammonia tank through

populated areas.

Do not tow a lift-assisted 2-point applicator or nurse tank
that, when fully loaded, weighs more than 1.5 times the

weight of towing vehicle.

Do not transport a 2-point applicator that exceeds the

capacity or ballasting of the tractor. There may not be
enough front wheel traction for safe steering.

Carry reflectors or flags to mark fertilizer applicator in

case of breakdown on the road.

Keep clear of overhead power lines and other

obstructions when transporting. Refer to transport
dimensions under “

Specifications and Capacities

” on

page 155.

Do not exceed 20 mph (32 km/h). Never travel at a speed

which does not allow adequate control of steering and
stopping. Reduce speed if towed load is not equipped with

brakes.

Reduce speed on rough roads.

Comply with national, regional and local laws.

Do not fold or unfold the fertilizer applicator while the
tractor is moving (other than field lift).

Содержание NP2540





































































































































































































Отзывы:

Нет отзывов