manualshive.com logo in svg

GREAT PLAINS EXTRA 300SP, Инструкция по эксплуатации

Поделиться
Скачать
GREAT PLAINS EXTRA 300SP Скачать руководство пользователя страница 8

8

ASSEMBLE THE FUSELAGE

Note:

 If you have not already fi gured out how to remove the 

canopy, the magnets at the rear of the canopy keep it locked 
in place. Lift the back of the canopy to remove it.

Install the Main Landing Gear

❏ ❏ 

1. Slide a 5 mm washer onto the axle. Insert a 4 mm axle 

through the right main 

landing gear

. Slide a 5 mm washer 

onto the axle followed by the 5 mm lock nut and the wheel. 

(All of these need to be slid into position before securing the 

assembly to the wheel pant). Tighten the axle nut to secure 
the axle to the landing gear. Do this for both landing gears.

❏ ❏ 

2. Apply a drop of thread locker to two 6-32 set screws 

and thread them into two 5/32" [4 mm] wheel collars. Slide 
one wheel collar onto the axle followed by the wheel and then 
the second wheel collar. Tighten the set screws against the 
axle. Be sure the wheel spins freely after the wheel collar is 
in place. Do this for both axles.

❏ ❏ 

3. Attach the main landing gear to the 

fuselage

 with 

three 4-40 

 ½" SHC screws, #4 lock washers and #4 fl at 

washers. 

Note:

 The front of the main landing gear sweeps 

back, while the back of the gear is straight. Do this for both 
landing gear halves.

Содержание EXTRA 300SP

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды