background image

5

ORDERING REPLACEMENT PARTS

Replacement parts for the Great Planes Extra 300SP EP ARF 
are available using the order numbers in the 

Replacement 

Parts List

 that follows. The fastest, most economical service 

can be provided by your hobby dealer or mail-order company.

To locate a hobby dealer, visit the Hobbico web site at www.

hobbico.com. Choose “Where to Buy” at the bottom of the menu 
on the left side of the page. Follow the instructions provided 
on the page to locate a U.S., Canadian or International dealer. 
If a hobby shop is not available, replacement parts may also 
be ordered from Tower Hobbies at www.towerhobbies.com, 
or by calling toll free (800) 637-6050.

Parts may also be ordered directly from Hobby Services by 
calling (217) 398-0007, or via facsimile at (217) 398-7721, but 
full retail prices and shipping and handling charges will apply. 
Illinois and Nevada residents will also be charged sales tax. If 
ordering via fax, include a Visa

®

 or MasterCard

®

 number and 

expiration date for payment.

  Mail parts orders 

Hobby Services

  and payments by  3002 N Apollo Drive, Suite 1
  personal check to:  Champaign IL  61822

Be certain to specify the order number exactly as listed in the 

Replacement Parts List

. Payment by credit card or personal 

check only; no C.O.D.

If additional assistance is required for any reason contact 
Product Support by e-mail at productsupport@greatplanes.
com, or by telephone at (217) 398-8970.

Order No.

Description

Wing

Fuselage

Tail Surface Set

Canopy

Landing Gear

Wheel Pants

Spinner

Cowl

Wing Tube

Decals

Wing Bolts

GPMA5350

GPMA5351

GPMA5352

GPMA5353

GPMA5354

GPMA5355

GPMA5356

GPMA5357

GPMA5358

GPMA5359

GPMA5360

REPLACEMENT PARTS LIST

KIT CONTENTS

 1. Cowl

 2. Fuselage

 3. Canopy 

Hatch

  4.  Wing / Ailerons

 5. Rudder

 6. Horizontal 

Stabilizer

 7. Elevator 

Halves

 8. Spinner

 9. Landing 

Gear

 10.  Wheels

 11.  Wheel Pants

 12.  Tail Wheel Assembly

 13.  Wing Tube

Kit Contents

1

11

6

2

12

13

4

4

8

9

10

7

7

3

5

Содержание EXTRA 300SP

























Отзывы: