4/25/19
195-144M
3S-3000
Assembly
16
Install Ladders
The ladders mount between the lugs (1) of the upper
mounts. Flat washers are placed between ladder side
frame and the lugs. Hex head bolts install from the inside,
to minimize obstructions to foot movement during
climbing.
Start with the right walkboard ladder:
1.
Lay the ladder (2) on the walkboard with the swing
holes up and near the lug holes. Align the holes in the
ladder in between the holes in the lugs.
2.
Insert
3
8
x 1
1
4
-inch bolts (3) through (in the following
order):
a.
the ladder (1) side plate
b.
a washer (4), and
c.
the mounting lug (2).
Secure with lock nut (5).
3.
Repeat for left wing section.
Install Slow Moving Vehicle Reflector
The slow moving vehicle (SMV) reflector is mounted in
the holes at the rear of the walkboard on the center
section.
1.
Install the SMV mounting blade (1) and secure with
5
16
x
3
4
-inch round head square neck bolts (2), lock
washers (3), and hex nuts (4).
2.
Install the SMV reflector (5) on the mounting blade
and secure with
1
4
x
5
8
-inch screws (6), lock washers
(7), and hex nuts (8).
1
2
4
5
3
4
5
Figure 14
Ladder Installation
68440
1
2
5
4
3
6
8
7
Figure 15
SMV Installation
68447C
Содержание 3S-3000 Series
