GREAT PLAINS 3S-3000 Series, Оригинальное руководство пользователя

Страница: 17 / 50

3S-3000 Table of Contents Assembly 13
4/25/19 Table of Contents 195-144M
Connecting Opener Lift Hoses
Refer to Figure 8
23. Connect the
3

8
-inch hydraulic hoses (1) coming from
the back side of the wing pressure control valve to
the base end tees (2) on the inner opener lift cylinder
(3) of each wing frame.
This is the hose which should extend beyond the
wing tool bar hose holder (4) by 45 inches (1.1m) (A)
as assembled from the factory.
24. Connect the
3

8
-inch hydraulic hoses (5) coming from
the bottom of the wing pressure control valve, to the
tee (6) at the jumper hose (7) coming from the rod
end of the inner opener lift cylinder (3) of each wing
frame.
This is the hose which should extend beyond the
wing tool bar hose holder (4) by 35 inches (89cm) (B)
as assembled from the factory.
25. Disconnect the
3 
8
-inch hydraulic hoses (1) and (5)
where they tee together (8) at the back of the
mainframe and reroute them through the hose guide
cutouts (9) and through the plastic tie downs on the
center box frame.
Figure 8
Opener Lift Hydraulic Diagram
15666
3
4
7
6
2
5
13
11
1
12
14
8
8
5
1
4
7
3
A
B
A
B
2