GREAT PLAINS 3S-3000-3210 Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 118

background image

2018-06-18

Table of Contents

195-441M

3S-3000/F/HD/HDF

Table of Contents

Appendix B - Initial Setup

108

38

112

Warranty

Great Plains (a division of Great Plains Manufacturing, Inc.) warrants to the
original purchaser that this Great Plains unit will be free from defects in material
and workmanship for a period of one year from the first use date when used as
intended and under normal service and conditions for personal use; ninety days
for custom/commercial or rental use. This Warranty is limited to the replacement
of any defective part by Great Plains and the installation by the dealer of any
such replacement part. Great Plains reserves the right to inspect any equipment
or part which are claimed to have been defective in material or workmanship.
The following items and/or conditions are

not covered under warranty

:

failures resulting from abuse or misuse of the equipment, failures occurring as a
result of accidental damage or acts of God, failures resulting from alterations or
modifications, failures caused by lack of normal maintenance as outlined in the
operator’s manual, repairs made by non-authorized personnel, items replaced or
repaired due to normal wear (such as wear items and ground engaging
components), repeat repair due to improper diagnosis or repair by the dealer,
temporary repairs, service calls and/or mileage to and from customer location,
overtime premium, or unit hauling expenses. The warranty may be voided if the
unit is towed at speeds in excess of 20 miles per hour (32 kilometers per hour),
or is used in soils with rocks, stumps, or other obstructions.
Great Plains reserves the right to make changes in materials or design of the
product at any time without notice. The warranty shall not be interpreted to
render Great Plains liable for damages of any kind, direct or consequential or
contingent to property. Furthermore, Great Plains shall not be liable for damages
resulting from any cause beyond its control. This warranty does not extend to
crop loss, losses caused by planting or harvest delays or any expense or loss of
labor, supplies, rental machinery, or for any other reason.
No other warranty of any kind whatsoever express or implied, is made with
respect to this sale; and all implied warranties of merchantability and fitness for
a particular purpose which exceed the obligations set forth in this written
warranty are hereby disclaimed and excluded from this sale.
This warranty is not valid unless the unit is registered with Great Plains within
10 days from the date of the original purchase.

«
...
110
111
112
113
114
...
»

Содержание 3S-3000-3210























































































































Отзывы:

Нет отзывов

Похожие инструкции для 3S-3000-3210

Sturmvogel 4500 L

Бренд: Rabe Страницы: 12

Stripmaster 950

Бренд: IDEAL Страницы: 16

Бренд: Saf-Fro Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды