GREAT PLAINS 2SF24 Скачать руководство пользователя страница 9

Страница: 9 / 92

2SF24 and 2SF30

Table of Contents

Index

Important Safety Information

2018-08-02

Table of Contents

Index

155-015M-A

Practice Safe Maintenance



Understand procedure before doing work. Use proper
tools and equipment. Refer to this manual for additional
information.



Work in a clean, dry area.



Lower the drill, put tractor in park, turn off engine, and
remove key before performing maintenance.



Make sure all moving parts have stopped and all system
pressure is relieved.



Allow drill to cool completely.



Disconnect battery ground cable (-) before servicing or
adjusting electrical systems or before welding on drill.



Inspect all parts. Make sure parts are in good condition
and installed properly.



Remove buildup of grease, oil or debris.



Remove all tools and unused parts from drill before
operation.

Safety At All Times

Thoroughly read and understand the instructions in this
manual before operation. Read all instructions noted on
the safety decals.



Be familiar with all drill functions.



Operate machinery from the driver’s seat only.



Do not leave drill unattended with tractor engine running.



Do not stand between the tractor and drill during
hitching.



Keep hands, feet and clothing away from power-driven
parts.



Wear snug-fitting clothing to avoid entanglement with
moving parts.



Watch out for wires, trees, etc., when folding and raising
drill. Make sure all persons are clear of working area.

Содержание 2SF24





























































































Результаты поиска

Содержание 2SF24

Отзывы:

Бренды по названию

Популярные бренды

GREAT PLAINS 2SF24, Руководство по эксплуатации

Результаты поиска

Содержание 2SF24

Отзывы:

Бренды по названию

Популярные бренды