GREAT PLAINS 2SF24, Руководство по эксплуатации

Страница: 30 / 92

2018-08-02 Table of Contents Index 155-015M-A
2SF24 and 2SF30 Table of Contents Index Operating Instructions 26
Folding the Drill
Equipment Damage Risk:
Do not lower drill while in folded position, certain equipment
damage will occur.
1. Folding is best achieved on level ground with the
tractor transmission in neutral. Be aware of the
clearance required to fold the drill.
2. NEVER allow anyone near the drill during folding
operations.
Refer to Figure 16
3. When folding the drill, the drill transport stabilizer
frame should line up with the nest on the front of the
main frame,
Refer to Figure 17
4. If the stabilizers scrape the wing on the tongue, the
boxes can be raised or lowered by adjusting the wing
adjustment turnbuckle.
Refer to Figure 18
5. Apply hydraulic pressure to the raising and lowering
system. Raising the drill may be required to free up
the transport lock pins in the vertical tubes for
removal. Place pins into transport position.
6. Fold boxes using hydraulic cylinders. Do this very
slowly and carefully. Serious damage could occur if
done fast and carelessly.
Figure 16
Transport Stabilizers in Road
Position
10673
Figure 17
Wing Adjustment Turnbuckle
10674
Figure 18
Transport Lock Pin in Transport
Position
17269