GREAT PLAINS 2SF24 Скачать руководство пользователя страница 34

Страница: 34 / 92

2018-08-02

Table of Contents

Index

155-015M-A

2SF24 and 2SF30

Table of Contents

Index

Operating Instructions

Parking

Choose a location with level firm ground. Do not
unhitch on a steep slope.

Fold drill (page 26).

Set hydraulic circuits to neutral.

Disconnect hydraulic lines. Secure them so that they
do not touch the ground.

Disconnect electrical cables, capping where
provisioned.

Move jack from storage position to side of tongue
(see Figure 24).

If the ground is soft, place a board or plate under the
jack to widen the ground contact area.

Slightly raise tongue with jack until the weight of the
tongue is on the jack and has been removed from
the tractor drawbar.

Remove the hitch pin and safety chain from the
tractor drawbar.

Restart tractor and pull away from drill.

The following steps should be done when preparing to
hitch the drill to the tractor.

10. Raise or lower the drill tongue as needed and hitch

the drill to the tractor drawbar. Always use a safety
chain, see “

Tractor Draw Bar Hook-Up

” on

page 15.

11. Plug the drill hydraulic lines into the tractor remotes.

12. Connect the electrical cables.

13. Retract the jack until the weight of the tongue and pin

it on the storage post located on top of the main
tongue (see Figure 25).



NOTE:

If the drill is being hitched up and operated for the first
time, it is important to follow the safety, setup,
adjustment, bleeding, and operating information.

Figure 24

Jack in Vertical Position

10739

Figure 25

Jack in Transport Position

10739

Содержание 2SF24





























































































Результаты поиска

Содержание 2SF24

Отзывы:

Похожие инструкции для 2SF24

Бренды по названию

Популярные бренды

GREAT PLAINS 2SF24, Руководство по эксплуатации

Результаты поиска

Содержание 2SF24

Отзывы:

Похожие инструкции для 2SF24

Бренды по названию

Популярные бренды