5
#3
#3
Hardware for Step 1:
6x #1 Cam Dowels
STEP 2:
Take panel A and align with upstand (B) as shown, making
sure the hardware on panel A is facing outwards. When
connected insert 4x thick cam locks (#3) into the large
drill holes on panel A and turn clockwise to lock.
STEP 3:
Take the central divider panel (C) and attach it to
the cam dowel hardware on panel A. Ensure the
notched corner is facing the floor. When in place,
insert 2x thin cam locks (#3) into the large drill
holes on panel C and turn clockwise to lock.
Hardware for Step 3:
2x #3 Cam Locks (thin)
Hardware for Step 2:
4x #2 Cam Locks (thick)
STEP 4:
Take both side panels (D & E)
and insert 2x cam dowels (#1)
into the outer holes of the top
edge as shown. The top edge
has one softened corner.
Hardware for Step 4:
4x #1 Cam Dowels
#1
#1
#1
#1
#1
A
B
A
B
#2
#2
#2
#2
C
#3
#3
#3
#1
D
E
#1
#1
#1
#1
#1
#1
A
STEP 1:
Please note, you are
building this unit front up to
start with.
Working on a protective surface
such as a carpet or rug, take top/seat
panel (A) and back upstand (B) and lay
them down with the drill holes facing up.
Using a phillips screwdriver, insert 6x cam
dowels in the holes shown on the panels.
Using Cam Locks:
When inserting into
the panel, ensure that
each cam lock’s arrow
is pointing towards the
drill hole on the side
edge of the panel &
the dowel that it will
be receiving. When
the panels are in the
connected position,
using a screwdriver,
turn the cam lock in a
clockwise direction to
lock and secure.
TOP
BASE
#2
