Great Lakes Case & Cabinet 4PBK12, Руководство по установке

Страница: 5 / 28

DETAIL A
(TOP BRACKET-RAILS
WITH M6 MOUNTING)
DETAIL B
(BOTTOM BRACKET- TOE OUT MOUNTING
- WITH M6 MOUNTING
DETAIL C
(BOTTOM BRACKET- TOE IN MOUNTING
- WITH #12-24 MOUNTING
DETAIL D
(TOP BRACKET-RAILS
WITH #12-24 MOUNTING)
A
B
C
D
5
(Detail A - Top Width Brackets)
Top Variable Depth Side Rail
1/2" Ext. Tooth Washer
1/2"-13 x 1" lg.
Hex Cap Screw
Vertical Upright
Top Width Bracket
2.
Assemble top (Detail A) and bottom (Detail B) width brackets to
vertical uprights.
DO NOT TIGHTEN!
To assemble a cross member and extension bar, determine the desired
rack depth. Insert the small square tab of the rear member cross piece
into the correct square hole on the extension bar. Firmly push down on
the cross member so that the tab is inserted firmly into the extension
bar hole. Insert the push button rivet as shown.
Once the cross members and extension bars have been assembled,
the variable depth side rails can be mounted to the uprights (Please see
Detail A). Letters at each end of the assembly indicate top or bottom
installation, as well as which direction the assembly should be facing
(front or rear).
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
DWG NO: REV
SHEET:
OF
DRAWN
CHECKED & APP.
TITLE
DRAWING NOT TO SCALE
PART NUMBER:
QTY PER UNIT: 1
MATERIAL TYPE:
MATERIAL GAUGE:
FINISH:
GREAT LAKES CASE & CABINET CO., INC.
P.O. BOX 551 EDINBORO, PA 16412
PHONE (814) 734-7303 FAX (814) 734-3907
E-MAIL glcc@greatcabinets.com
Use of this document is subject to
a confidentiality and nondisclosure
agreement with Great Lakes Case
& Cabinet Co., Inc. (GLCC) and may
not be reproduced, disclosed or
utilized in whole or in part without
prior written authorization from GLCC.
NOTICE:
TOLERANCE UNLESS OTHERWISE NOTED:
A/- 1 
.XXXX +/- .010
.XXX +/- .015
.XX +/- .030
.X FOR REF. ONLY
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS ARE IN INCHES
DIMENSIONAL LIMITS APPLY
AFTER APPLICATION OF FINISH
INTERPRET DRAWING PER ASME Y14.5M-1994
THIRD ANGLE
PROJECTION
DATE
DATE 1 1
2 WSS 8/1/2013
WSS 8/2/2013
I019512
I019512-m-test2
C.R.S.
SEE DETAILS
SEE DETAILS
4 POST FRONT / BACK KIT, ASSEMBLED
DEPTH RANGE 24" TO 36"
EST. WEIGHT :
16.65 lbmass
Assembled Left
Variable Depth
Side Rails
Assembled Right
Variable Depth
Side Rails
“F” indicates Front Mounting - “R” indicates Rear Mounting
“T” indicates Top Mounting - “B” indicates Bottom Mounting
1/2"-13 x 1" lg.
Hex Cap Screw
1/2"-13 Hex Nut
1/2" Ext. Tooth Washer
1/2" Ext. Tooth
Washer