Jaguar II User Manual
Installation and Operation of Sign Cutting Plotter 2-1
2.1 Installation
Caution 1
Make sure the power switch is off before installing the cutting plotter.
Carefully handle the cutter to prevent any injuries.
Caution 2
Choosing a proper place before setting up the cutting plotter
Before installing your cutting plotter, select a suitable location, which meets the following
conditions.
The machine can be approached easily from any direction.
Keep enough space for the machine, accessories and supplies.
Keep the working area stable, avoiding sever vibration.
Keep the temperature between
5 and 40
℃
(41-104
o
F)
in the workshop.
Keep the relative humidity between
30% and 70%
in the workshop.
Protecting the machine from dust and strong air current.
Preventing the machine from direct sunlight or extremely bright lighting.
Caution 3
Connecting the Power Supply
Check the plug of the power cord to see if it mates with the wall outlet. If not, please contact
your dealer.
Insert the plug (male) into a grounded power outlet.
Insert the other end (female) of power cord into the AC connector of the cutting plotter.
2. Installation and Operation Procedures
