
Location of the blocks (B) for the straight section:
Only for oval pools.
CAUTION: When calculating the exact location of the concrete blocks (B), bear in mind the width of the polystyrene
foam.
Example (PEOV6059 / PEOV6027): The polystyrene foam must have a thickness of 2 cm. Consequently, a space
of 320 cm + 4 cm for the polys 2 cm ( Settling of the pool ) = 326 cm must be left.
NOTE: If you use polystyrene foam with a thickness of 3 cm, the distance between the walls must be 328 cm.
Build the wall with blocks with a thickness of 20 cm.
Lay the first row of blocks and mark the hollows of the blocks and then position the 10-mm rod.
Place the 10-mm iron rod ( V ) on the side nearest the pool, as shown in the photograph, and drill the bedding
at 15 cm.
(V) Ø 10 mm
50 cm
20 cm
(B)
12
Tool necessary
(not included)
Nødvendigt værktøj (medfølger ikke)
Tarvittavat työkalut (ei sisälly toimitukseen)
Nødvendige verktøy (ikke inkludert)
Verktyg behövs (ingår ej)
DK
Placering af blokke (B) til den lige strækning: Kun for ovale pools.
FORSIGTIG: Ved beregning af den nøjagtige placering af betonblokke (B) skal du huske bredden af
polystyrenskummet.
Eksempel (PEOV6059/PEOV6027): Polystyrenskummet skal have en tykkelse på 2 cm. Derfor skal der være 320
cm + 4 cm til polyst 2 cm (så poolen kan sætte sig) = 326 cm tilovers.
BEMÆRK: Hvis du bruger polystyrenskum med en tykkelse på 3 cm, skal afstanden mellem væggene være 328
cm.
Byg væggen med blokke med en tykkelse på 20 cm.
Læg den første række af blokke, markér fordybningerne efter blokkene, og anbring derefter 10-mm-stangen.
Placer 10-mm-jernstangen (V) på siden nærmest poolen som vist på billedet, og bor i underlaget ved 15 cm.
(B)
POOL INTERIOR
UIMA-ALTAAN ULKOPUOLI
3
POOLENS YDERSIDE
POOL EXTERIOR
POOLENS INDERSIDE
ALTAAN SISÄPUOLI
BASSENGETS INNSIDE
POOL INSIDA
POOL UTSIDA
BASSENGETS UTSIDE