GRAVOGRAPH L-Solution 700, Руководство пользователя

Страница: 92 / 104

L-SOLUTION 700 / 800 / 900 machines . 92 First contact
General maintenance
Before carrying out any maintenance, unplug the mains supply cable.
No internal part of the Gravograph machine requires user intervention : general maintenance is limited to external,
engraving work area and optics cleaning.
If you wish to have the inside of your machine cleaned, contact a Gravograph technician.
The mains cable should always be replaced if it is damaged in any way : flattened,
nicked, cracked etc..., or if there are bare wires.
Keeping the LASER system clean will ensure the highest quality engraving.
The frequency of cleaning will depend entirely on the type of material being engraved, the performance of your exhaust
blower, the operating environment, and the amount of LASER system usage over a given period of time.
Dirt or debris that is allowed to build up on the motion system components will cause uneven or rough engraving, or loss
of engraving position as well as premature component failure.
Smoke or dirt buildup on the optics can cause damage to them, loss of LASER power, or premature failure of these
components.
Use good judgment and keep in mind that a clean machine is the best performing machine.
Suggested cleaning and maintenance supplies
- Specific product for lens and mirrors cleaning (1 bottle provided with the machine)
- Soap solution mixture of 1 tablespoon (2 cl) liquid soap and 1 quart (liter) of water in a spray bottle
- Paper towels
- Cotton cloth
- Denatured alcohol ( NOT to be used on any painted surface, plastic, or the Top Window)
- Acetone (can be used on the engraving table but nowhere else)
- Cotton swabs (provided with the machine)
- Lens cleaner
- Lens cleaning paper (provided with the machine)
- Vacuum cleaner
- Set of Allen wrenches sized from .050 to 3/16 inch
When using acetone or denatured alcohol, please follow the instructions on the printed
label of these materials for safe handling procedures.
Please familiarize yourself with the motion system components.
It will help you understand which components need periodic cleaning.
General maintenance