GRAVOGRAPH L-Solution 700, Руководство пользователя

Страница: 88 / 104

L-SOLUTION 700 / 800 / 900 machines . 88 First contact
Options and accessories
Many options and accessories are available for this LASER machine. The cylinder attachment, cutting table and suction kit
are available at an additional cost.
Cylinder attachment (L-SOLUTION 800 and 900)
(diagram 1)
The cylinder attachment has been designed to engrave cylindrical objects. Two attachments come with the fixture, a cone
shaped disk attached to the motorized end of the fixture and an inverted cone shaped disk attached to the adjustable end
of the fixture. These attachments are used to hold wineglasses, mugs, cups, etc.
The cylinder attachment is placed on the engraving table.
Please refer to the instructions supplied with the cylinder attachment on how to properly install and use this option.
Options and accessories
Stand of slant for cylinder attachment (L-SOLUTION 800 and 900)
This stand of slant, permits to engrave cylindrical objects with a maxi. slant of 10
°
(diagram 2) .
Cutting kit
Cutting kit (diagram 3) is composed of 4 removable plates, spikes (supports) and back stops. It is to support the material
that you are cutting off of the engraving table’s surface to minimize surface contact area. The plate to be engraved is
supported by the spikes first positioned on 2, 3 or 4 removable plates arranged on the engraving table according to the
plate to be engraved sizes. In any case, place 5 spikes (supports) where the Zref is done (Top left-hand corner of the plate
to be engraved -
diagram 3 ).
It also redirects exhaust airflow below and above the material for better smoke removal.
L-SOLUTION 800 and 900
L-SOLUTION 800 and 900