29
USER MANUAL
GRAVITY X pressure
EN REV.V01 - 2020
10.1
Packing
Chose a clean and soft ground to spread out/ flatten out your glider. Free the cloth of soil,
dirt or stains like from leaves, grass or sand and sort the lines evenly. Use the riser-fix
system at the rear end of the wing for the risers. make sure that the glider is try and clean
be- fore you pack it up. Now start to fold the glider from the middle out cell by cell. after
that place both halves on top of each other and fold the glider to the end format. Shifted
packing prevents constant abrasion of the middle of the paraglider.
10.2
Recycle
GRAVITY uses only safe materials and puts a lot of value into saving resources as well as
using non-detrimental materials. Nevertheless, the materials used in a paraglider need
proper disposal. Please return worn out gliders to GRAVITY airsports & more GmbH or
disassemble the glider into its parts and recycle them accordingly.
11
FLYING ACCESSORIES_
11.1
Xgear_ COMFORT IN ITS HIGHEST QUALITY
The GRAVITY Xpressure can basically be flown with all approved harnesses without rigid
cross bracing, which meet the corresponding minimum distances of the chest strap and
suspension height through certification. The lower the harness's suspension point, the more
direct the glider’s reactions become when shifting weight. GRAVITY recommends the use of
the very safe and comfortable all-round harness Xgear, which is perfectly matched to the
Xpressure Xgear stands for relax to the power of 3 and this applies to the seating comfort
