Gravely 785023, Руководство оператора и каталог запасных частей

Страница: 9 / 30

9
INSTALLATION OF POWER BRUSH TO
RAPID UNITS
1. Install Rapid adapter kit number 78510700 to the
unit (figure 6). See kit 78510700 for installation
instructions.
2. Install double universal joint (item 2) on Rapid
adapter kit.
3. Install hex bolt, spacer and nut from Rapid adapter
kit as shown in figure 6.
NOTE: The three other hex bolts, spacers and nuts from
the Rapid adapter kit are not needed for this application.
4. Install Rapid adapter kit and double universal joint
(item 2) on power brush (item 1) (figure 7).
5. Install washer and lynch pin on Rapid adapter kit.
IMPORTANT: MAKE SURE attachment locking pin is
completely seated prior to engaging the PTO.
6. Install knob (item 3) on power brush (item 1) with
5/16” x 1-1/4” hex bolt (item 4), flat washer (item 5)
and 5/16” spin lock flange nut (item 6) (figure 7).
INSTALLATION OF FOUR-WHEEL
TRACTOR COMPLETING KIT (KIT #
78701400)
1. Install adapter (item 25) on the power brush
(item 1) with four 1/2” x 1-1/2” hex bolts (item 24)
and 1/2” nylon locknuts (item 34) (figure 8).
2. Install two plastic grommets (item 16) into the
square holes in the left side of the frame (figure 9).
3. Install the control rod bracket (item 21) with two 1/4
x 3/4” self tapping screws (item 20).
Figure 6
2
Rapid Adapter Kit 78510700
Hex Bolt, Spacer, Nut
Figure 7
2
1
Rapid Adapter Kit 78510700
Engage
Attachment
Locking Pin
3, 4, 5 & 6
Washer &
Lynch Pin
Figure 8
24 & 34 25