Gravely 785023, Руководство оператора и каталог запасных частей

Страница: 14 / 30

14
7. Separate the power brush from the tractor. Put the
universal joint on the drive shaft of the power brush.
(figure 10).
8. Keep the push rod, control rod and universal joint
with the power brush.
REMOVAL OF POWER BRUSH FROM THE
GEAR TWO-WHEEL TRACTOR
1. Lower the stand on the tractor to keep the rear of
the tractor from falling to the ground when the
power brush is removed.
2. Remove cotter pin (item 15), flat washer (item 14),
and control rod (item 13) from the latch release
(figure 20).
3. Remove knob (item 9) from the control rod
(item 13).
4. Remove control rod (item 13) from control rod guide
(item 11).
5. Remove the lynch pin and washer from the quick
hitch pin (figure 20).
6. Separate tractor and the power brush. Put the
universal joint on the power brush drive shaft
(figure 15).
WARNING: Unintentional startup or contact with
exposed components can cause severe
personal injury. Stop the engine, wait for all
parts to come to a complete stop, remove the
key from the ignition switch, and disconnect the
spark plug wire before performing any
maintenance, installation, removal, or
adjustment.
Figure 19
22 & 23
18
25
Equipment
Latch
Cotter
Pin
32
33
Figure 20
Quick Hitch
Pin
Pivot
Washer &
Lynch Pin
Latch
Release
Zerk
14 & 15
13