Gravely 785023, Руководство оператора и каталог запасных частей

Страница: 11 / 30

11
7. Install control rod (item 18) to power brush (item 1)
with flat washer (item 22) and cotter pin (item 23)
(figure 12).
INSTALLATION OF TWO WHEEL TRACTOR
COMPLETING KIT (KIT # 78502300)
1. Remove the nut and hex bolt that fastens the gear
shift control lever to the handlebar. Keep the nut
and hex bolt (figure 13).
2. Install control rod guide (item 11) on handlebar and
gear shift control with 1/2” x 2-34” hex bolt (item 10)
and the nut removed in step 1.
3. Install grommet (item 12) in the control rod guide
(item 11).
4. Put the bushing (item 8) on the top right side
attachment adapter stud. Put the nut on the stud
and tighten (figure 14).
5. Install double universal joint (item 2) power brush
(item 1) shaft drive (figure 15).
Figure 12
22 & 23
Contact
Adjustment
18
Contact
Adjustment
25
Equipment
Latch
Cotter
Pin
32
33
Figure 13
9
Remove original nut and
hex bolt and replace with
the hex bolt with item 10.
Gear Shift
Control
13
12
11
Figure 14
Attachment
Adapter
Quick Hitch
Pin
Nut
8
Adapter Stud
Figure 15
Hitch Pin
Hole
2