GRAUPNER ULTRAMAT AC/DC EQ, Руководство по эксплуатации

Страница: 12 / 20

ULTRAMAT AC/DC EQ
12
※ The charge voltage setup
When the charge or discharge of lithium battery is
started without connecting the balance board to the
balance port of the charger.
When the charge or discharge of lithium battery is
started with connecting the balance cable to the bal-
ance port of the charger.
LiPo = 3.7V~4.3V LiIon = 3.6V~4.1V LiFe = 3.2V~3.7V
For safety purposes, this charger is designed to automatically deliver 1C charge rate
to lithium batteries Example : LiPo cell of 1500mAh capacity : 1C = 1500mAh ( = 1.5A )
charge current.
The maximum voltage for LiIon is 4.1V per cell, LiPo is 4.2V per cell and LiFe is 3.7V
per cell. Therefore, it is extremely important to choose the correct battery type to be
charged, as each Lithium battery has the different voltage level. Otherwise, it may
cause very serious damage to the batteries and increase the risk of a fire !
CAUTION
- LiPo discharge ( ex: LiPo 7.4V, 5000mAh )
①
Press INC button to access to DISCHARGE mode from LiPo CHARGE mode
②
Press ENTER button shortly then the value of discharge current blinks, press DEC/
INC buttons to set the desired discharge current
③
Press ENTER button shortly then the value of cell voltage blinks, press DEC/INC but-
tons to set the desired cell voltage
④
Press and hold ENTER button to start to discharge battery.
Lithium battery is no needed to discharge, just discharge 20% when battery is stored
※
The discharge voltage setup
LiPo = 3.0V~4.0V LiIon = 2.9V~3.9V LiFe = 2.2V~3.2V
BALANCER
NOT
BALANCER
LiPo
D=1.0A
LiPo
D=1.0A
LiPo
D=1.0A
CON
CONNECTED
CON
CONNECTED
DISCHARGE
3.0V/C
DISCHARGE
3.0V/C
DISCHARGE
3.0V/C
BATTERY
PLEASE
CHECK
WAIT....